Advertise here.....for the year

If you like to advertise here...please email us...ONLY 7 will be placed in this top spot..mincster@msn.com...
   

Wednesday, August 22, 2007

How to make Pussy Cat Ears


All you need are these simple things

You Need:
Plastic Headband
Ears Pattern
Animal Print Foam
Black Craft Foam
Five Brass Fasteners
Wire Cutters
Scissors
Low Temp Glue Gun
Black Permanent Marker
Instructions:
Cut a piece of black foam to 2-1/2" x 12". Center it on the top of the plastic head band. Glue the foam in place using a low temp glue gun. Taper the foam along both edges to 3/8" an inch. Begin at the middle of one side and foam the foam over the edge of the head band and glue in place. Continue by doing the other half of the same side. Repeat for the other side.
Use wire cutters to snip the prongs of the brass fasteners. Bend the remaining prong pieces down. Glue fastener heads to the top of the foam covered head band beginning in the center and spacing 3/4" apart.
Print Ears Pattern. Staple to animal print foam all around the outsides of the ears. Cut out all four ears. Use a black marker to color in the white edges of the ears. Glue pieces back to back so you will have two ears with animal print on both sides. Glue ears to head band.

No comments:

My first Daughter to get Married...

Tabberone"s VeRO Commandments...A helpful site for Designers....Who have TROLLs on their back...

If you are having issues with items being pulled by Ebay...This will be very helpful to you as a Seller....Click on the Cat logo!! Tabberone words to me were: Education is power!!!!